These are emails sent to Pacific Research Solutions in regards to a problem we have with the remote base radio. Keep in mind that the controllers sold at Pacific Research Solutions are very good and generally have no problems but if a problem does araise they are not handled as quickly as you may expect. 12/11/2000: 12:54PM Figured this problem out on our own and the controller and remote base radio in question is currently in for repair... 11/16/2000 I gave you a response on Oct 30. Did you make the changes? Gregg > Still waiting to see if a problem could be found in the files I sent to you > concerning the remote base radio where the remote radio transmitts to the > repeater but the repeater does not go back. It has been 3 weeks and would > like to get this resolved... > Perry/KG8ID 10/25/2000 We have still not figured out the problem with the remote base, the connected frequency transmits to us but we cannot transmit back. Here are the files from both controllers... Perry/KG8ID ----- Original Message ----- From: Perry To: Pacific Research Sent: October 29, 2000 7:12 PM Subject: Link Radio I was wondering if you had time to go through the files I sent to you concerning the link radio and second controller, we have been running our nets without the presents of our linking stations and I would like to send the link radio and controller to you so you can hook it up there to try and determine what the problem is, to bring you up to date again the station linked to us through the remote radio comes across fine but the repeater does not go back, we believed we may have had a programming issue and we have been over and over the files and have not seen anything incorrect... Thanks Perry/KG8ID 10/30/2000 Just looking at the files, -1 input #2 is not turned on. I am not sure if this is what you are looking for. Are you trying to turn this input on/off by a user command? If so, what command are you using? > I was wondering if you had time to go through the files I sent to you > concerning the link radio and second controller, we have been running our > nets without the presents of our linking stations and I would like to send > the link radio and controller to you so you can hook it up there to try > and determine what the problem is, to bring you up to date again the > station linked to us through the remote radio comes across fine but the > repeater does not go back, we believed we may have had a programming issue > and we have been over and over the files and have not seen anything > incorrect... > Thanks > Perry/KG8ID 10/31/2000 controller 1 has a matching macro number as controller 2 starting at 200 skipping 4 lines and then the next frequency and sends a 35210 to turn on remote frequency, then we send a 68200, then we say the frequency we turned on and change courtesy to double beep. It all worked well for some time and then the repeater stopped transmitting back to the remote radio. -----Original Message----- From: Pacific Research [mailto:gregg@pacres.com] Sent: Monday, October 30, 2000 12:32 PM To: Perry Subject: re: Link Radio Just looking at the files, -1 input #2 is not turned on. I am not sure if this is what you are looking for. Are you trying to turn this input on/off by a user command? If so, what command are you using? > I was wondering if you had time to go through the files I sent to you > concerning the link radio and second controller, we have been running our > nets without the presents of our linking stations and I would like to send > the link radio and controller to you so you can hook it up there to try > and determine what the problem is, to bring you up to date again the > station linked to us through the remote radio comes across fine but the > repeater does not go back, we believed we may have had a programming issue > and we have been over and over the files and have not seen anything > incorrect... > Thanks > Perry/KG8ID 11/03/2000 Did you get a chance to look at the files I sent to see if our problem is software? Perry/KG8ID 11/09/2000 Still waiting to see if a problem could be found in the files I sent to you concerning the remote base radio where the remote radio transmitts to the repeater but the repeater does not go back. It has been 3 weeks and would like to get this resolved... Perry/KG8ID